Hardware projects tagged pcb-layout
Open hardware projects tagged pcb-layout on BoardRepo. View schematics and PCBs in the browser and download the sources.
Projects
Repository with the PCB design for the door alarm project.
A project built around learning new concepts and challenging my current understanding and capabilities in Electrical Hardware design
A Repository for Battery Management PCBs
An electronic dice on attiny85, including PCB
KiCad project files for a BNO085 breakout board.
A Pmod™ Compatible peripheral module featuring a pair of active optical audio transmitter/receivers
Ethernet Breakout Board based on Microchip's ENC82J60
Open-source six-layer Raspberry Pi CM4/CM5 carrier board with USB-C, 25 W PoE, M.2 NVMe, microSD, I2S, and expansion-board connectors.
Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.
A simple PCB schematic for USB LED light that turns on when it's dark.
This is a general purpose AT89S51 (8051) board.
Low-power time switch using the ATtiny85 microcontroller.
A substitute for 4xAA battery holders, with rechargeable lipo.
A collection of my electronic circuits that may be used by other projects.
MatrixClock - source code, schematics and pcb layout
STM32 based radio-frequency transceiver PCB for IoT applications on KiCad
Raspberry Pi RS485 module
An ESP32 based smart watch (WIP)
Yet Another XC7Z010 Board
A PCB Ruler created in KiCAD
40 Years after the Sinclair ZX81 was released this project aims to preserve the first 4 chip computer
KiCAD files of USB Hub for SMPS powered Raspberry Pi 3 Cluster
170v Nixie Tube Power Supply from 5v Supply
Placa Franzininho DIY - Placa compatível com Arduino no formato DIY para oficinas de soldagem
Kicad design files for a Zynq 7020 SoM
Repository for PCB Design Projects
Connected GPS tracker PCB
This project is a synchronous buck converter providing 5V at 3A from 4.5-V to 17-V input.
An S80 Single Board Retro Computer
8 MIDI controlled loops switcher PCBs
Collection of LoRa peripheral circuits for various applications
Hardware design files for open authenticator
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino
:satellite: A standalone device project featuring SX1278 and ESP8266 components, serving as a radio-WiFi gateway. The primary objective is to provide support for OOK remote power outlets, with the flexibility for potential future integration of LoRa 433 and other communication protocols, thanks to its adaptable hardware.
Programming jig for ESP-12 modules using Wemos D1 Mini ESP8266 Module and Pogo Pins
A simple and compact bluetooth audio PCB for the TU/e Multidiscplinary CBL track "Circular Electronics"
Custom STM32 RF board designed in KiCad.