Imported from GitHub: mlnoga/pimoco · commit 7c6b0f1 · license GPL-3.0

Description

Telescope mount and focuser control with a Raspberry Pi

README

pimoco

Telescope mount and focuser control with a Raspberry Pi

Motivation

Why do we need a separate device to control stepper motors attached to a telescope? Often times, a Raspberry Pi 4 running Ekos/Kstars/Indi will be attached to the telescope anyway, providing plenty of compute power. Modern stepper motor controllers like the Trinamic TMC5160 have an on-board motion controller which accepts position read, set target speed and go-to commands via SPI. The Raspberry Pi has two such interfaces for a total of five devices on its GPIO port.

This is

• capable (1/256 microsteps, up to 1000x sidereal slewing, silent tracking, load-adaptive speed w/o step loss)
• robust (no Wifi, Bluetooth or USB connections to the mount as a source of error)
• beautiful (supports SkySafari on phones/tablets and game controllers via Ekos/Kstars/Indi)
• inexpensive (no need for separate microcontrollers like OnStep or TeenAstro)
• manageable (no separate device firmware, only Indi drivers which Linux package managers can update)

Wiki

• Hardware
• Software
• Results