BrowseBoardRepo

KO4HUI-Spooltenna

Public

@modulo8

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 114 files, ready to open in KiCad687 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip60 KBGerbers and drill zip: Compensation Coil v1.245 KBGerbers and drill zip: Wire Spool Antenna Blank V1.222 KBGerbers and drill zip: Wire Spool Antenna Blank V1.343 KBGerbers and drill zip: Wire Spool Antenna Ultra Blank V1.441 KBGerbers and drill zip: Wire Spool Antenna Ultra Blank V1.644 KBGerbers and drill zip: Wire Spool Antenna Ultra V1.660 KBGerbers and drill zip: Wire Spool Antenna V1.252 KBGerbers and drill zip: Wire Spool Antenna V1.360 KBGerbers and drill zip: Wire Terminator v1.230 KBPick and place (CSV)669 BPick and place (CSV): Compensation Coil v1.2271 BPick and place (CSV): Wire Spool Antenna Blank V1.235 BPick and place (CSV): Wire Spool Antenna Blank V1.335 BPick and place (CSV): Wire Spool Antenna Ultra Blank V1.4295 BPick and place (CSV): Wire Spool Antenna Ultra Blank V1.6295 BPick and place (CSV): Wire Spool Antenna Ultra V1.6566 BPick and place (CSV): Wire Spool Antenna V1.2278 BPick and place (CSV): Wire Spool Antenna V1.3291 BPick and place (CSV): Wire Terminator v1.235 BBOM CSV2.2 KB
Schematic PDFEvery sheet, to read or print53 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)735 KB3D model (GLB): Compensation Coil v1.2427 KB3D model (GLB): Wire Spool Antenna Blank V1.3153 KB3D model (GLB): Wire Spool Antenna Ultra V1.6736 KB3D model (GLB): Wire Spool Antenna V1.2677 KB3D model (GLB): Wire Spool Antenna V1.3732 KB3D model (GLB): Wire Terminator v1.2185 KB
Browse all files

Share KO4HUI-Spooltenna

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/modulo8/ko4hui-spooltenna

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

KO4HUI-Spooltenna

This repository contains design files for the Spooltenna(TM) end fed half wave antenna used for portable amateur radio operating.

The design files in this repository were created with KiCad 8.0 and information on how to use this tool can be found here: https://docs.kicad.org/8.0/.

License

This project is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License. To view a copy of this license, visit https://creativecommons.org/licenses/by-sa/4.0/.

License: CC BY-SA 4.0

Attribution

  • Creator: Rob Bowser
Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.