mictorHSMC

Mictor to HSMC Adapter / Breakout Board (Mictorコネクタ - HSMC変換/ブレークアウト基板)

Overview

This repository contains the KiCad design files for an adapter board that connects a Mictor connector (often used for Logic Analyzers and JTAG tracers) to an HSMC (High-Speed Mezzanine Card) interface.

This project allows for signal probing or debugging of HSMC-equipped FPGA boards (e.g., Intel/Altera DE-series) using standard Mictor-compatible equipment.

本リポジトリは、MictorコネクタをHSMCインターフェースに変換・接続するためのKiCad設計データを公開するものです。主にFPGAボード（HSMC搭載機）の信号をロジックアナライザ等でデバッグする用途を想定しています。

Specifications

• Connector A (Mictor):
  • Part Number: 5767007-8 (TE Connectivity)
  • Type: 38-pin Mictor Receptacle
• Connector B (HSMC):
  • Part Number: ASP-122952-01 (Samtec)
  • Type: Male Intel® HSMC Specified Q Strip® Connector
• PCB Tool: KiCad (v6.0 or later recommended)

Pin Assignment

The Mictor connector pins are mapped to the HSMC interface as follows. (Mictorコネクタの各ピンは以下のようにHSMCへ接続されています)

Mictor Pin	Net Name	HSMC Pin
1	HSM_CLKOUT0	39
2	HSM_CLKIN0	40
3	HSM_D0	41
4	HSM_D1	42
5	HSM_D2	43
6	HSM_D3	44
7	HSM_D4	47
8	HSM_D5	48
9	HSM_D6	49
10	HSM_D7	50
11	HSM_D8	53
12	HSM_D9	54
13	HSM_D10	55
14	HSM_D11	56
15	HSM_D12	59
16	HSM_D13	60
17	HSM_D14	61
18	HSM_D15	62
19	HSM_D16	65
20	HSM_D17	66
21	HSM_D18	67
22	HSM_D19	68
23	HSM_D20	71
24	HSM_D21	72
25	HSM_D22	73
26	HSM_D23	74
27	HSM_D24	77
28	HSM_D25	78
29	HSM_D26	79
30	HSM_D27	80
31	HSM_D28	83
32	HSM_D29	84
33	HSM_D30	85
34	HSM_D31	86
35	HSM_D32	89
36	HSM_D33	90
37	HSM_D34	91
38	HSM_D35	92

Note: Mictor Shield pins (S1-S5) are connected to the common Ground (HSMC Shield Pins S1-S12).

⚠️ Attribution & License for Footprints

This repository includes footprint and symbol data downloaded from SnapEDA and other component distributors to ensure the completeness of the project files. These files are included solely for the purpose of reproducing this specific PCB design.

Note to Users:

• The footprints and symbols for the connectors (TE 5767007-8 and Samtec ASP-122952-01) are the intellectual property of their respective creators/providers.
• If you intend to use these footprints for a different project, please download the latest and official versions directly from the provider to ensure accuracy and compliance with their licensing terms.

Sources:

• Samtec ASP-122952-01 on SnapEDA
• Samtec 5767007-8 on SnapEDA

Disclaimer

This project is a hobbyist creation and is provided "AS IS" without warranty of any kind. The author is not responsible for any damage to your hardware (FPGA boards, probes, etc.) caused by the use of this design. Please verify pinouts and signal integrity before fabrication.

本設計データは無保証です。使用に伴うハードウェア（FPGAや測定器等）の故障・損害について作者は責任を負いません。製造前にピンアサインや信号品質を十分にご確認ください。