We'd like to use optional cookies for analytics, session replay and marketing. You can change this any time. Privacy policy

Browse BoardRepo

ikoka-nano-meshtastic-device

Public

Share ikoka-nano-meshtastic-device

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/ndoo/ikoka-nano-meshtastic-device

This link opens the latest version. Copying it does not grant additional access.

BoardRepo© 2026

Docs About News Connect AI Security Trust Center PrivacyTerms Copyright Contact

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 15 files, ready to open in KiCad1.0 MBSchematic PDFEvery sheet, to read or print131 KB 3D modelThe board with its parts, for an enclosure (GLB)5.1 MB

Browse all files

Copy of ndoo/ikoka-nano-meshtastic-device · 2026-06-28

Licence file found: CERN-OHL-P-2.0, repository root · Request removal · Licence looks wrong · Files added by BoardRepo: LICENSE (restored 2026-09)

Version history

ikoka-nano-meshtastic-device/

t

Loading files…

README

Ikoka Nano Meshtastic Device

A Meshtastic device based on the Seeed Studio XIAO nRF52840 and EBYTE E22-XXXMXXS series LoRa modules. Pinout matches the Meshtastic xiao_ble variant.

The focus is on small size without an onboard display or buttons, meaning it must be used with Meshtastic client software, or as a remote repeater managed with remote node administration.

Connectors

USB-C for power and data
Qwiic connector for I²C sensors
Battery connectors (PicoBlade 1.25-2P)
Solar connector (PicoBlade 1.25-2P, 4.45 to 6.45 V - BQ25100 charge IC)

Libraries Used

SnapMagic E22-900M30S footprint & symbol
SparkFun KiCad Libraries
SeeedStudio OPL KiCad Library (forked to add missing XIAO nRF5240 symbol)

Building One

Software Required

The files were created in KiCad 8
Clone this git repository recursively, i.e. with --recursive

Ordering PCBs

Generate the production files
- Install kicad-jlcpcb-tools
- Open the PCB file
- Tools -> External Plugins -> JLCPCB Tools
- Look over the Bill of Materials list and perform any substitutions required
- Click Generate
Order the PCBs
- Use the Gerbers, BOM and CPL files in jlcpcb/production_files
- Default 1.6mm 2-layer PCB settings should work well, this PCB passes DRC based on JLCPCB specifications (other than the silkscreen of XIAO module being clipped by the PCB edge)

Comments

About

A Meshtastic device based on the Seeed Studio XIAO nRF52840 and EBYTE E22-XXXMXXS series LoRa modules. Pinout matches the Meshtastic xiao ble variant.

CERN-OHL-P-2.0
94 stars
0 comments
11 downloads

Updated Sep 17, 2026

Ask about this board

Download Download Download Download Download Download

Ordering Components

Check the exported BOM file in jlcpcb/production_files

Assembling the PCB

I suggest PCBA, but I used handsoldering pads and all SMDs are 0603 or larger so can be hand-soldered.

Solder the SMD components
- The larger (0805) capacitors go closer to the USB-C connector end of the PCB
Solder the connectors
Solder the XIAO BLE
1. It helps to tin the BAT+ pad first, it will help ensure successful soldering through the back. Remove excess solder so that the pad is flat, otherwise the XIAO will not sit flush
2. Solder one pad first then verify all pads and the battery hole are lined up well, adjust the alignment if necessary
3. Solder one more pad diagonally opposite, double check the alignment of the pads
4. Solder the rear hole that goes to the BAT+ pad
5. Solder the rest of the pads
6. Test that the XIAO is able to power up from the battery and that charging works (a yellow LED will light up if the battery is charging), you won't be able to access the BAT+ pad once the E22 module is soldered
Solder the E22-900M30S module

Flashing Meshtastic Firmware

Pre-built Binaries (Unofficial)

Custom Meshtastic builds web installer
Select your device -> Xiao BLE
Select firmware version -> Pick the latest release
Select update or reinstall -> Update device (usually works fine, but if Meshtastic does not start after a few seconds, wipe and reinstall)
Download UF2
Connect USB-C to PC, double-tap the reset button
Drop UF2 file into XIAO-SENSE USB volume

Building from Source

Follow the instructions at meshtastic/firmware/variants/diy/xiao_ble/.

Enclosure

A snap-fit 3D printable enclosure is available in the enclosures folder. This has not been updated for the latest board design (2b17a53).

PCB Images

No comments yet. Be the first to ask about this board.