Loading files…
Prototyping precision and high-speed analog circuits on breadboards, perfboard or stripboard is impractical and performance falls victim to parasitics. The Manhattan prototyping style is a possible solution, and involves "dead-bugging" components on copper-clad board and making connections using component leads and tinned or enamelled wire. Nodes are connected mid-air through component leads, on isolated parts of the copper-clad board, or using "tiles" consisting of square-shaped FR4 pieces with exposed copper. Since the circuit is constructed on top of a layer of copper, a low-impedance return path is automatically present.
While there are a wide range of prototyping aids available, they are not always designed with regard to this method of prototyping. For example, various DIP adapters are available, which break out SMD IC packages like SOIC, MSOP and QFN to pin headers with standard 100mil spacing. The adapters in this repository, while follwing a similar idea, are designed differently with decoupling and placement on a base copper-clad board in mind. The foundations of this project are based on Mark's Manhattan Toolkit.
Copper-clad board forms the base upon which the circuit is built. A board of suitable size is to be selected, and power strips cut out of spare board and fixed to the board in such a way that the adapter boards fit between them with space for making connections to ground. The adapters themselves are placed in between the power strips. Connections are to be made preferrably using enamelled copper wire, since accidental contact won't lead to unwanted connections. Having the power rails on the sides of the components is similar to the arrangement of connections on a solderless breadboard.
(After writing this readme, I happened to come across this picture from the Entertaining Hacks blog (link below), which shows a very similar setup. Looks like this idea is not so original after all!)
Dimin created a panel of all the adapter boards that's 100mm x 100mm, making it easy to order cheaply:
- Me: (LM317 regulator, 555 oscillator, 74AC04/source follower current pulser)
- NoahBad: (LM311 based bandgap reference) Although this examples does not use the adapters, it's a good example of Manhattan-style prototyping.
No comments yet. Be the first to ask about this board.