Loading 3D model… large boards can take a moment.
To be able to flash the ESP32-C3 on the board, you must use the code given in the firmware production folder. Raw code is given in this folder as well, and in order to build it, you would have to clone this repo for a PIO USB UART bridge by GrechTech and replace the uart-bridge.c file with the code version you want, bootloader for installing something like micropython, and the normal version for using thonny with micropython.
If you are planning to implement UART with the WROOM, please use pins 8 and 9, as those are what work the best
To use circuitpython on the RP2040 chip, please use the custom board build inside the firmware folder. You can build it yourself from my circuitpython fork, and eventually (once it gets approved), from Adafruit and maybe even the offical circuitpython website one day
| VENDOR | ITEM | PRICE(USD) | SHIPPING | PCS | CNT | REMARKS 1 | REMARKS 2 |
|---|---|---|---|---|---|---|---|
| JLCPCB | |||||||
| PCB | 3.2 | 5 | 1 | LEAD-FREE HASL | |||
| PCBA | 42.43 | 2 | 1 | Only for SMD | |||
| 26.83 | UPS DDP to avoid customs headache (cheapest shipping available with DDP) | Detailed by the cost-optimizing guide | |||||
| 25.1 | Taxes & Fees | ||||||
| TOTAL | 97.56 | ||||||
| ALIEXPRESS | |||||||
| HEADERS | 2.13 | 10 1x40 Female 10 1x40 Male | 1 | ||||
| BUTTONS | 2.77 | 20 | 1 | 6x6x4.3mm | EXCLUDED | ||
| 1.99 | |||||||
| TOTAL | 4.12 | ||||||
| TAXES | (Have way more than enough needed for ALIEXPRESS) | ||||||
| TOTAL | 101.68 |
No comments yet. Be the first to ask about this board.