Olive Robotics EdgeROS SOM01-X USB Carrier Board

Overview

This repository contains the KiCad project files for a carrier board designed to interface with the Olive Robotics EdgeROS SOM01-X. The carrier board connects via the 2x18 pin connector on the EdgeROS and provides a USB 2.0 interface.

Features

• 2x18 pin connector for interfacing with EdgeROS SOM01-X
• USB 2.0 interface
• Designed using KiCad

Prerequisites

• KiCad 7.0.1 or higher
• Basic understanding of PCB design and electronics

Getting Started

1. Clone the Repository: Clone or download this repository to your local machine.
2. Open the Project: Navigate to the directory where you cloned the repository and open the KiCad project file.
3. Review the Schematic: Open the schematic editor to review the connections.
4. Inspect the Layout: Open the PCB layout editor to review or modify the board layout.
5. Generate Gerber Files: Once you are satisfied with the design, generate the Gerber files for manufacturing.

Usage

1. Assembly: Solder the 2x18 pin connector and the USB 2.0 interface components onto the carrier board.
2. Connection: Connect the carrier board to the EdgeROS SOM01-X using the 2x18 pin connector.
3. Testing: Power up the EdgeROS and connect a USB device to test the interface.

Contributing

If you find any issues or have suggestions for improvements, feel free to open an issue or submit a pull request.

License

This project is open-source and available under the MIT License. See the LICENSE.md file for more information.

Contact

For any questions or inquiries, please contact Olive Robotics at [email protected].

---

Happy building! 🤖