BrowseBoardRepo

multi-probe-swr-meter

Public

@pavelmc

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 8 files, ready to open in KiCad69 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip96 KBGerbers and drill zip: probe_buffers37 KBPick and place (CSV)5.1 KBPick and place (CSV): probe_buffers1.2 KBPCB BOM CSV (PCB SVG)2.3 KBPCB BOM CSV (PCB SVG: probe_buffers)887 B
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)6.4 MB3D model (GLB): probe_buffers1.1 MB
Browse all files

Share multi-probe-swr-meter

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/pavelmc/multi-probe-swr-meter

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

Multi-Probe SWR/PWR Meter with Icom Tuner handling for Yaesu Rigs

Icom Tuner handling for Yaesu Rigs

This hardware implements a way to handle the following Icom tuners:

  • AT-130(E) (same as AH-3)
  • AT-140 (same as AH-4)

The software

The software is made in JAL & Jallib, please visit http://www.justanotherlanguage.com

The hex is ready for a PIC16F887 with a cheap motherboard crystal of 14.31818 Mhz

Comments, contributions and questions

If is issues about the software or kicad files use the ISSUES tab on this page, all other infos via the author email at [email protected]

Changelog

v0.1

  • Initial creation of the repository.
  • Just the first PCB, the main one, other will follow.
  • We use only one Sided PCB, so all vias to the other side are in deed wires
Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.