BrowseBoardRepo

ozlockconbadge2017

Public

@peterfillmore

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 14 files, ready to open in KiCad354 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip368 KBGerbers and drill zip: OzLockPanel13 KBPick and place (CSV)981 BPick and place (CSV): OzLockPanel35 BPCB BOM CSV (PCB SVG)614 B
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)731 KB3D model (GLB): OzLockPanel2.9 KB
Browse all files

Share ozlockconbadge2017

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/peterfillmore/ozlockconbadge2017

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

OzLockConBadge2017

Hardware and Firmware for the OzLockCon2017 Badge

Derived from the uDuck: https://github.com/insecurityofthings/uDuck - as you can probably tell from the source code.

The hardware may support the uDuck firmware as the circuit is based off it - but i screwed something up and it doesn't want to work. Ran out of time to debug so focused on the flashy flashy.

Warning!

don't solder the USB connector onto the badge until you check the pin out! i screwed up and reversed the pads on the footprint - again...

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.