BrowseBoardRepo

mega_led_3000

Public

@pinpox

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 15 files, ready to open in KiCad29 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip29 KBGerbers and drill zip: remote14 KBPick and place (CSV)1.5 KBPick and place (CSV): remote456 BPCB BOM CSV (PCB SVG)1.1 KBPCB BOM CSV (PCB SVG: remote)369 B
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)1.5 MB3D model (GLB): remote734 KB
Browse all files

Share mega_led_3000

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/pinpox/mega-led-3000

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

mega_led_3000

Remote + Controller for a RGB LED light strip.

The project consists of two parts: a base unit that is connected to the LED-strip and a remote control unit. Both are build using Arduinos and some other parts (see below) and communnicate over 2.4 GHz signals.

The sourcecode is separted in the respective folders so that it can be build and uploaded using the inotool for arduino (http://inotool.org/quickstart)

For the 2.4GHz communication the RF24 library is used (https://github.com/nRF24/RF24).

Schematic

Partlist

Base unit
  • Arduino Uno
  • nRF24L01 2.4 GHz transciever
  • 3x Resistor 440 Ohm
  • 3x TIP120 Transistor
Remote
  • Arduino Micro
  • nRF24L01 2.4 GHz transciever
  • 3x EXP-R05-031 RGB-illuminated rotatory encoders
Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.