STM32F103VET6_STUno

Public

Loading 3D model… large boards can take a moment.

README

STM32F103VET6 STUno

An ST development board based on the STM32F103VET6/STM32F103VE (Clock: 72MHz, Flash: 512Kb, Ram:64Kb) MCU (the LQFP-100 version of the famous Blue Pill) compatible with STM32Duino (Arduino).

Pinout:

Files and Folders description

RBOARD_F103VET6 it's the variant board for the STM32 Arduino Core.
rSTM32F103VET6 it's the KiCAD 5.1.2 project.
rSTM32F103VET6.schematic.pdf the schematic.

Install

Update: Since STCore version 1.9.0 most of the F103XXXX boards (including this) are already supported, so there is no need to install anything.

This requires the STM32 core for arduino, the ST original.
I used this guide to add the board, you can check it or continue with my suggestions to install the new board.
Copy the "RBOARD_F103VET6" folder to the Arduino "variants" folder, in win7 is located at: c:\Users\<USERNAME>\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\variants
Edit the "boards.txt" file, in win7 is located at a lever up than the "variants" folder, search for the Generic F1 board line and add the lines to leave it as I show you next:

GenF1.menu.pnum.Generic_F103RET6=Generic F103RET6 (Blue Button)
GenF1.menu.pnum.Generic_F103RET6.upload.maximum_size=524288
GenF1.menu.pnum.Generic_F103RET6.upload.maximum_data_size=65536
GenF1.menu.pnum.Generic_F103RET6.build.board=GENERIC_F103RET6
GenF1.menu.pnum.Generic_F103RET6.build.product_line=STM32F103xE
GenF1.menu.pnum.Generic_F103RET6.build.variant=Generic_F103Rx


# Generic STM32F103VET6 STUno
GenF1.menu.pnum.RBOARD_F103VET6=STM32F103VET6 STUno
GenF1.menu.pnum.RBOARD_F103VET6.upload.maximum_size=524288
GenF1.menu.pnum.RBOARD_F103VET6.upload.maximum_data_size=65536
GenF1.menu.pnum.RBOARD_F103VET6.build.board=RBOARD_F103VET6
GenF1.menu.pnum.RBOARD_F103VET6.build.product_line=STM32F103xE
GenF1.menu.pnum.RBOARD_F103VET6.build.variant=RBOARD_F103VET6

Comments

STM32F103VET6 STUno

An ST development board based on the STM32F103VET6/STM32F103VE (Clock: 72MHz, Flash: 512Kb, Ram:64Kb) MCU (the LQFP-100 version of the famous Blue Pill) compatible with STM32Duino (Arduino).

Pinout:

Files and Folders description

RBOARD_F103VET6 it's the variant board for the STM32 Arduino Core.

rSTM32F103VET6 it's the KiCAD 5.1.2 project.

rSTM32F103VET6.schematic.pdf the schematic.

Install

Update: Since STCore version 1.9.0 most of the F103XXXX boards (including this) are already supported, so there is no need to install anything.

This requires the STM32 core for arduino, the ST original.

I used this guide to add the board, you can check it or continue with my suggestions to install the new board.

Copy the "RBOARD_F103VET6" folder to the Arduino "variants" folder, in win7 is located at: c:\Users\<USERNAME>\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\variants

Edit the "boards.txt" file, in win7 is located at a lever up than the "variants" folder, search for the Generic F1 board line and add the lines to leave it as I show you next:

GenF1.menu.pnum.Generic_F103RET6=Generic F103RET6 (Blue Button) GenF1.menu.pnum.Generic_F103RET6.upload.maximum_size=524288 GenF1.menu.pnum.Generic_F103RET6.upload.maximum_data_size=65536 GenF1.menu.pnum.Generic_F103RET6.build.board=GENERIC_F103RET6 GenF1.menu.pnum.Generic_F103RET6.build.product_line=STM32F103xE GenF1.menu.pnum.Generic_F103RET6.build.variant=Generic_F103Rx # Generic STM32F103VET6 STUno GenF1.menu.pnum.RBOARD_F103VET6=STM32F103VET6 STUno GenF1.menu.pnum.RBOARD_F103VET6.upload.maximum_size=524288 GenF1.menu.pnum.RBOARD_F103VET6.upload.maximum_data_size=65536 GenF1.menu.pnum.RBOARD_F103VET6.build.board=RBOARD_F103VET6 GenF1.menu.pnum.RBOARD_F103VET6.build.product_line=STM32F103xE GenF1.menu.pnum.RBOARD_F103VET6.build.variant=RBOARD_F103VET6

STM32F103VET6_STUno

Share STM32F103VET6_STUno