rpi-cm3-carrier-base

Raspberry Pi Compute Module Base Board

Description:

These are the design files for a circuit board intended to be used as a base for other custom PCB designs that make use of the Raspberry Pi Compute Module.

If you want to design a custom PCB based on the Raspberry Pi Compute Module but you have never done it before, this project can serve as a starting point. The board is designed on KiCAD which is an open source and cross-platform EDA software, in order to allow as many people as possible to take advantage of it.

More information about the project can be found on Instructables.

License:

Raspberry Pi Compute Module Base Board

Copyright (C) 2018 Manolis Agkopian

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.

Third party schematic symbols and footprints:

This project makes use of the CM schematic symbols and DDR2 SODIMM fooprint designed by Joan The Spark and distrubuted under the GNU General Public License Version 3.

It also makes use of the HDMI connector schematic symbol from the Digikey KiCAD Library repository which is distrubuted under the Creative Commons CC-BY-SA 4.0.