Loading 3D model… large boards can take a moment.
A fully analog circuit that activates an open-drain transistor for 1.5s after having waited 3s for the power supply to stabilize.
The timings can be adjusted by changing the RC circuits component values.
It is currently designed for a 12V power supply and can drive any power switch from 1.8V onwards.
The circuit will rearm itself only when the board 12V is removed then reapplied. Thus, it is possible to do a software reboot of the PC or powering it off like with a normal power button.
Digital timing diagram :
Steps :
1, the power supply is not present and the button output is kind of floating.1. The button output stays high due to a pull-up connected to the +12V.2.3.Bare PCB :
Assembled PCB :
Prototype :
The prototype has been made with recycled parts from old broken machines.
No comments yet. Be the first to ask about this board.