BrowseBoardRepo

rocket-hat

Public

@rose-rocketry

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 10 files, ready to open in KiCad345 KBSchematic PDFEvery sheet, to read or print109 KB3D modelThe board with its parts, for an enclosure (GLB)1.9 MB
Browse all files

Share rocket-hat

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/rose-rocketry/rocket-hat

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

Rocket-HAT

A Sensor Hat for a raspberry pi with: an IMU, Altimeter, and 5V power protection

Usage

There are two jumpers on the board; J7 is for powering the hat through the PI. Otherwise, the HAT will get power from the battery while also powering the Pi. J9 is to enable writing to the EEPROM after manufacture. This EEPROM is for matching with the Raspberry Pi foundation's specs.

There is also a solder bridge for the BNO055. This is in case we have an address conflict and need to change the address from 0x28 to 0x29.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.