Imported from GitHub: rubenbaldewsing/ODROID-H3-mITX-adapter · commit fa2e4a6 · license MIT

Description

Adapter board for mounting the ODROID H3(+) onto mITX formfactor. Including onboard LAN management, UART (BIOS) terminal and other features.

README

<img src=./build/3D.png alt="3D PCBA" width="60%" height=auto />

A feature rich mITX adapter for the ODROD H3(+) Designed for the NaSFW project

Features

• 1x12 header exposing ODROID GPIO
  • I2C1
  • I2C2
  • HDMI_CEC
  • UART_RTS
  • UART_CTS
• 1x10 header exposing ESP32 GPIO
  • GPIO4
  • GPI36
  • GPIO14
  • GPIO14 5V OUT
  • GPIO12
• 1x6 header exposing ESP32 programming
  • Pin conmpatible with FT232 boards
  • 3V3
  • RX
  • TX
• Front IO
  • 2xUSB2.0 header
  • Front IO header
    • Power LED connected to +5V_RUN
    • HDD connected to ESP32 GPIO4
    • PWR button connected to ODROID
    • RESET button connected to ESP32 GPI39
• On board USB2.0 A connector to ODROID (USB1)
• All USB
  • D+/D- ESD protection
  • VBUS protection
  • VBUS switchable by eitgher
    • ESP32
    • +5V_RUN
• ESP32 with Ethernet
  • Remote UART terminal (BIOS access)
  • 3x USB power control
  • Reset button input
  • PWR_ON button controll of ODROID via optocoupler
  • Always-on, powered by +5V_STBY or USB Type-C PD input

Manufacturing

Designed for ordering and assembly by JLCPCB