Loading…
A KiCad rebuild of the FujiNet FN32ROV WiFi/SIO adapter for Atari 8-bit computers, adapted for permanent internal mounting inside an XEBook laptop build.
This project is derived from the FN32ROV-1.7.1 release in FujiNetWIFI/fujinet-hardware, which is officially certified open source hardware by OSHWA (UID US000651). The original design is in DipTrace; this project is a from-scratch rebuild in KiCad, since DipTrace's binary file format has no viable automated conversion path into KiCad and this revision changes enough of the board that preserving the original layout wasn't a goal.
Work in progress — schematic and PCB layout are still being built out. Not yet fabricated or tested.
Everything else (ESP32-WROVER-E, CP2102N USB-serial bridge, power path, SIO level shifters) is carried over from the original design.
Built with KiCad 9. kicad-cli sch erc / kicad-cli pcb drc are used to verify the
design as it's built.
CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0), matching the copyleft, share-alike spirit of the original OSHWA-certified design.
Loading 3D model… large boards can take a moment.
No comments yet. Be the first to ask about this board.