Imported from GitHub: silverstee1/SD2SP2-Pro · commit ea06576 · license MIT

Description

Micro SD Card Adapter v1 and v2.0 for Gamecube's Serial Port 2

README

The inside PCB must be ordered in 1.2mm thickness. Surface finish must be ENIG at minimum.

The outside PCB must be ordered in 2.0mm thickness.

I recommend https://jlcpcb.com for PCB production.

Occasionally when receiving the pcb's from JLCPCB the outside pcb may have a bump/not flush cut near the SP1 side when it was cut at the fab and might require sanding to smooth it out for a better fit.

Included is a stl cover in the 2.0 project folder that fits flush with the outside pcb

SD2SP2 Pro 2.0

SD2SP2 PRO 2.0 BOM

The inside PCB must be ordered in 1.2mm thickness. Surface finish must be ENIG at minimum.

The outside PCB must be ordered in 2.0mm thickness.

Outside PCB

C1: 0402 22u Capactior (10V Min) - DigiKey Part# 490-GRM158R61A226ME15DCT-ND

LCSC Part# C3845593

J2: 02x04 2.54mm Female Pin Socket - DigiKey Part# SSW-104-22-F-D-VS-K-TR

LCSC Part# C5160819

J3: MicroSD Slot - DigiKey Part# 2223-MSD-4-ACT-ND

LCSC Part# C113206

U1: OR Gate IC - DigiKey Part# 296-1093-1-ND

LCSC Part# C7470

Alt Nexperia Digikey Part# 1727-3067-1-ND

LCSC Alt Nexperia Part# C12488

Inside PCB

J1: 02x04 2.54mm Male Right Angle Pin Header - DigiKey Part# 10129382-908002BLF-ND

LCSC Part# C492432

Special thanks to:

• citrus3000psi for the original project
• MockyLock for the idea
• misteraddons for the SD2SP2 PRO
• Extrems & emu_kidid for doing the real work needed to make this possible