BrowseBoardRepo

christmas-bauble

Public

@spacekookie

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 34 files, ready to open in KiCad710 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip52 KBGerbers and drill zip: christmas_bauble_rev154 KBGerbers and drill zip: christmas_bauble_rev252 KBGerbers and drill zip: christmas_bauble_rev344 KBGerbers and drill zip: christmas_bauble_rev3-243 KBPick and place (CSV)3.5 KBPick and place (CSV): christmas_bauble_rev13.6 KBPick and place (CSV): christmas_bauble_rev23.5 KBPick and place (CSV): christmas_bauble_rev32.2 KBPick and place (CSV): christmas_bauble_rev3-22.2 KBPCB BOM CSV (PCB SVG)2.4 KBPCB BOM CSV (PCB SVG: christmas_bauble_rev1)2.7 KBPCB BOM CSV (PCB SVG: christmas_bauble_rev2)2.4 KBPCB BOM CSV (PCB SVG: christmas_bauble_rev3)1.4 KBPCB BOM CSV (PCB SVG: christmas_bauble_rev3-2)1.4 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)1.8 MB3D model (GLB): christmas_bauble_rev13.1 MB3D model (GLB): christmas_bauble_rev21.8 MB3D model (GLB): christmas_bauble_rev31.2 MB3D model (GLB): christmas_bauble_rev3-21.2 MB
Browse all files

Share christmas-bauble

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/spacekookie/christmas-bauble

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

Kookies Christmas Bauble

A jolly christmas decoration on a PCB. Hoo hoo hoo!

It uses a 555 timer and a shift register + two buttons to generate patterns that are then displayed on a ring of simple LED's on the outside. The perfect thing to hang off your christmas tree in the jolly season (I know I'm early...) :)

The design uses SMD components (except for the LED's that are throughhole). The original schematic and layout was done by Ashley Mills (https://github.com/staropram). The board requires only one layer! It can thus be made at home (if the apropriate tools for cutting the PCB are present).

Check out my blog article here for details :) The christmas bauble went into production on 17.11.2015. Unfortunately Revision 3.1 got produced, not the updated and much cooler Rev 3.2** :/ Check out the picture belo.wspi

All the revision 3 boards up to and including Rev 3.2 have a flaw where the XOR gate (U1) will make the functionality useless! Do not solder it on. You have to bridge two pins to make it work. Revision 3.3 fixes the issue.

Pictures

Partlist

Battery Holder: http://www.mouser.de/ProductDetail/Keystone-Electronics/3012TR/?qs=sGAEpiMZZMtT9MhkajLHrixYIYDZwOfD%2fKquWGKQDng%3d

Resistors: http://www.mouser.de/Passive-Components/Resistors/SMD-Resistors-Chip-Resistors/_/N-7h7yu?P=1yzmno7Z1yzmotu

595 Shift register: http://www.mouser.de/ProductDetail/Texas-Instruments/SN74HC165DR/?qs=sGAEpiMZZMtYFXwiBRPs00UWwMKcYyCs

555 Timer: http://www.mouser.de/ProductDetail/Texas-Instruments/TLC555CDR/?qs=sGAEpiMZZMuHTYi1bHPYELMHAyKcqQNZ

Capacitor: http://www.mouser.de/ProductDetail/Murata-Electronics/GRM32ER71E226KE15L/?qs=sGAEpiMZZMs0AnBnWHyRQAqZuYDIKiCDcXG6%252bp%252b0hpI%3d (you want 22 µF - Not sure if that's included in the Schematic and I'm too lazy to check right now)

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.