Loading 3D model… large boards can take a moment.
The SparkFun Qwiic Relay Line are a series of Qwiic compatible boards to control high power devices from a microcontroller over I2C using the Qwiic interface.
The SparkFun Qwiic Relay - 1X1A DPDT lets you control high power devices from a microcontroller over I2C. This relay breakout uses the G6K-2F-Y DC3 dual-pole/dual-throw relay from Omron Electronic Components capable of switching loads of 1A/30VDC and 0.3A/125VAC (at 40°C) with very low drive currents to switch the relay. This board has one 3-pin screw terminal connector for solderless connection to one of the relay's terminals and a 0.1"-spaced plated through-hole header for connecting the second terminal. It also has options to drive the relay over I2C (via Qwiic or a soldered connection) or an external drive input such as a switch or I/O signal. Driving the relay over I2C only requires up to 5.8mA@3.3V and driving it from an external input requires up to 33mA@3.3V.
Repository Contents
- /Examples - Simple Arduino examples for the Qwiic Relay Line
- /Hardware - KiCad design files (.brd, .sch)
- /docs - Documentation files for the Qwiic Relay Line
Documentation
- Library - Arduino library for interfacing with 4 and 8-bit I2C GPIO Expanders.
- Hookup Guide - Basic hookup guide for the Qwiic Relay Line.
Product Versions
- COM-30416 - Qwiic Relay - 1X1A DPDT
License Information
This product is open source!
Please review the LICENSE.md file for license information.
If you have any questions or concerns on licensing, please contact technical support on our .
Ask about this board
No comments yet. Be the first to ask about this board.