Hardware projects tagged sparkfun-tutorial
Open hardware projects tagged sparkfun-tutorial on BoardRepo. View schematics and PCBs in the browser and download the sources.
Projects
The hardware repository for the designs of the PCBs in the SparkPNT RTK Facet mosaic. This repo also includes the design files for the display and connector boards utilized in our next-generation of Facet GNSS products.
Documentation and hardware repository for the SparkFun Triband GNSS RTK Breakout, featuring the UM980 high precision GNSS/RTK module from Unicore Communications
The SparkFun GNSS Disciplined Oscillator (GNSSDO / GNSSDO+) is a precision time and frequency reference based on the Septentrio mosaic-T GNSS receiver. It features a disciplined 10MHz TCXO / OCXO oscillator, aluminum enclosure, Ethernet, PTP broadcast, data logging, multiple power options, and supports the Fugro AtomiChron timing service.
A breakout board for the Bosch Particulate Matter Sensor BMV080 PM2.5 supporting Qwiic and SPI.
Documentation, firmware, and hardware Files for the SparkFun BlueSMiRF v2. These boards work as a wireless UART pipe and are a great wireless replacement for serial cables.
Hardware design for the SparkFun Pico Add On Flipper Board for XRP
Breakout board for the Septentrio mosaic-T GNSS timing receiver
A USB breakout board for the ZED-X20P allband GNSS RTK receiver.
A USB breakout board for the mosaic-G5 P3 allband GNSS RTK receiver
A small breakout board for the quadband RTK capable LG290P GNSS receiver .
A USB evaluation board for the dual L1/L5 frequency DAN-F10N GNSS receiver.
A USB breakout board for the quadband RTK LG580P receiver with dual antenna input and extremely accurate heading.
A simple breakout board for the SparkPNT GNSS Flex modules
Hardware Repository for the SparkFun IoT Node - LoRaWAN Development board
The ESP32 Pico in a classic Pro Mini form factor.
Add a crisp, high-contrast user interface to your project with this compact 1.5-inch OLED display, featuring effortless Qwiic integration and low power consumption.
The SparkFun Red Vision Kit for XRP adds a camera and touchscreen display function to the XRP Robotics Kit using a SparkFun MicroPython port of OpenCV.
The SparkFun IoT RedBoard - RP2350 is a wireless development board in the R4 form-factor based around the Raspberry Pi RP2350 microcontroller.
A breakout for the IM19 GNSS-tilt-compensating IMU from Feyman
Documentation and hardware files for the low cost SparkFun GNSS L1/L5 Breakout - NEO-F10N.
A SparkFun Thing Plus development board for the ESP32-S3.
A small breakout board for the serial-controlled MY1690X-16S MP3/WAV audio player module.
An Arduino R3 compatible shield for playing MP3s with a serial interface.
A small board that adds a display, navigation, logging, and battery management.
Qwiic and USB breakout for the AllKey Pro Finger Print Sensor.
Documentation, example code, and hardware for the SparkFun Soft Power Switch - JST 2mm.
A Qwiic breakout for the STC31 CO2 and SHTC3 Temperature and Humidity Sensors.
Qwiic Breakout for the 14-channel Multi-Spectral Sensor AS7343 from AMS.
A 1"x1" Qwiic board that boosts the Qwiic connector system from 3.3V up to 5V.
A development board using the Thing Plus footprint featuring the ESP32-C5 Dual-Band module.
The OpenScale - IoT is an easy-to-use open-source wireless solution to measure weight and temperature.
An indoor air quality board combining the SCD41 CO2 sensor and the SEN55 PPM/VOX with humidity and temperature as well.
A USB-C serial-to-USB breakout board for the ID-Innovations Tiny RFID modules.
A Qwiic Breakout for the MCP4725 12-Bit Digital-to-Analog Converter
A line of Qwiic compatible power and signal relays.
A Qwiic breakout for the STCC4 C02 and SHT40 temperature and humidity sensor.
Transform your RP2350 RedBoard into a standalone machine-vision platform with this 2.0-inch capacitive touch display, featuring built-in support for the Red Vision Camera and OpenCV.
A power meter based on the Allegro ACS37800 which can sense both current (+/- 30A) and voltage
Documentation, example code, and hardware for the SparkFun Soft Power Switch - USB-C.
Documentation, example code, and hardware design files for the SparkFun Qwiic Navigation Switch. Add a Navigation Switch to your next project with Qwiic!
Documentation, example code, and hardware design files for the SparkFun Qwiic Directional Pad. Add a D-Pad to your next project with Qwiic!
SparkFun's Qwiic breakout for the ADE7953. Measure AC current non-invasively with a current transformer
SparkFun's Qwiic breakout for the INA2XX family of devices
SparkFun's breakout for the SFA40 Formaldehyde Sensor
A Qwiic breakout for the VEML7700 ambient light sensor
A simple to use Qwiic capacitive soil moisture sensor.
The SparkFun Teensy Ethernet Adapter lets you easily connect a Teensy 4.1 to the Internet via an Ethernet connection.