rateeg

Imported from GitHub: tharaka27/RatEEG · commit ff07968 · license MIT

Description

RatEEG is 4 channel EEG device for iSeizure project

README

Epilepsy is one of the most common neurological disorders and occurs with an incidence of 68.8/100,000  person-years. The age-adjusted incidence of epilepsy is estimated to be 44/100,000 person-years.  Despite the introduction of new antiepileptic drugs in the last decades, one-third of people with epilepsy  continue to have seizures despite treatment.  However, even when seizures are well controlled, self-reported quality of life is significantly lowered by the  anxiety associated with the unpredictable nature of seizures and the consequences therefrom. Some of the  difficulties in managing treatment-refractory epilepsy can be ameliorated by the ability to detect clinical  seizures.   This information might be useful both in developing accurate seizure diaries and in providing therapies during  times of greatest seizure susceptibility. The ability to rapidly and accurately detect seizures could promote  therapies aimed at rapidly treating seizures. The capability to detect seizures early and anticipate their onset  prior to presentation would provide even greater advantages. These early detection and prediction s ystems  might be able to abort seizures through targeted therapies. Such systems would also be able to prevent  accidents and limit injury. 

Typically seizures are detected by analyzing the electroencephalogram (EEG), but obtaining it outside the  hospital is too difficult for long-term monitoring. The electrocardiogram (ECG) is however easily  obtainable in a home environment. Earlier studies showed that most tonic-clonic (TC) seizures are  accompanied by a specific heart rate (HR) pattern.    This project was started as our 2nd year semester project of the Computer Science and Engineering  Department, the University of Moratuwa in February 2019. The device with EEG was designed by us under   Dr Shantha Fernando (Consultant Neurologist).    

Our target is to build a portable 4-channel EEG along with heart rate sensor  So the final project will be a    

“Low-cost wearable device to identify Tonic-clonic seizure using 4 channel EEG and heartbeat” 

• schematic designing the EEG module
• PCB print
• Writing firmware
• Desktop application for debugging
• Android/ios app