ModularControlPanel

Mechanics, PCB and Software for my modular control panel that is used with my cnc machine driven by LinuxCnc

If you need the mechanic parts, just open an issue and tell me.

This bboard delivers:

• 12 Key inputs
• 8 LED outputs driven by 2 boards of these: https://aliexpress.com/item/1005003772569293.html
• 3 ADC inputs
• directly routed inputs for connection to the control cabinet (connected via 15 Pin cable):
  • POWER_KEY or the standby Variant POWER_KEY_MAN, both enable POWER_EN
  • START_KEY, STOP_KEY, BREAK_KEY
  • input for the ESTOP_LED
  • ESTOP connector
  • 3 Reserve lines
• I2C extension connectors for 3.3 and 5V I2C
• ws28 smart LED connector
• one connector for a MIST System (see https://github.com/TheBlueManCoding/WemosMosfet)

all switches are connected by:

• https://aliexpress.com/item/4000502453714.html
• https://aliexpress.com/item/1005001317075834.html

Front view of the control panel mockup:

#PCB with some connected switches, leds and the mist cooling controller