Loading 3D model… large boards can take a moment.
WTMtronics has developed several EMS PCBs designed to use the Speeduino firmware. The Speeduino code is available here Speeduino, but the easiest way to load the code onto your ECU is to use SpeedyLoader.
The latest ECU designed by WTMtronics builds on the UA4C that came before it, and in fact if you compare the two side by side you will see many similarities. However there have been many improvements over the previous model which are outlined in the list below.
The reset button was added as the only reset connection made to the microcontroller to prevent unwanted resets from USB connected devices. There is a caveat to this arrangement though. While the first time a firmware is loaded it will go on without intervention, subsequent times will require the user to hold the reset button down then release the button when the program starts the upload process. If the upload does not start right away go back and try again.
The Ocelot uses the Silicon Labs CP2102N USB to UART controller chip. Most modern computers will detect and automatically load a driver for the COM port. If you are not getting the COM port, then you can download drivers from their website Silicon Labs Drivers.
Versions:
A4:
A3:
vA3:
The Under Arduino Four Channel was designed to be as small as possible wile still using a standard off the shelf Arduino MEGA and Hammond extruded enclosure. This was achieved by using SMD components and placing the Arduino upside-down on top of the PCB. The unique stacking arrangement allows the unit to be particularly thin for a unit that still uses a separate Arduino MEGA. It is a 4+4 board that incorporates the follow features.
Latest version: C6
*Knock is currently unsupported in the firmware. Either input can be used for VSS.
The No Overhang Two Channel was designed to incorporate as many features as possible into a through-hole board that does not exceed the dimensions of the Arduino MEGA microcontroller it sits on top of. It is a 2+2 channel board that incorporates the features below.
Latest version: D1
No comments yet. Be the first to ask about this board.