BrowseBoardRepo

rlcsv3

Public

@waterloo-rocketry

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 90 files, ready to open in KiCad1.4 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip193 KBGerbers and drill zip: clientside_board_schematics216 KBGerbers and drill zip: Hardwired CAN support190 KBGerbers and drill zip: relay_board152 KBGerbers and drill zip: rlcs_power209 KBPick and place (CSV)4.2 KBPick and place (CSV): clientside_board_schematics3.9 KBPick and place (CSV): Hardwired CAN support2.6 KBPick and place (CSV): relay_board3.8 KBPick and place (CSV): rlcs_power4.1 KBBOM CSV16 KB
Schematic PDFEvery sheet, to read or print177 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)3.9 MB3D model (GLB): clientside_board_schematics8.4 MB3D model (GLB): Hardwired CAN support3.6 MB3D model (GLB): relay_board3.4 MB3D model (GLB): rlcs_power5.8 MB
Browse all files

Share rlcsv3

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/waterloo-rocketry/rlcsv3

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

Remote Launch Control System

RLCS stands for Remote Launch Control System. It's purpose is to fill our rocket with ethanol and nitrous oxide, then ignite the ignition puck inside the rocket, all from a distance of 3000' away at launch control. To do so, it has control over multiple valves at the rocket, a linear actuator to disconnect the fill arm from the rocket, and 2 ignition coils inside the ignition puck.

Repository Layout

All Arduino firmware code is in /src

All electrical schematics and PCB layouts are in /schematics

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.