tougherpowermonitor-hw

What is this?

Power monitor with three channels, each capable of continuous 10A and 24V. It is compatible with both Arduino and Feather, and is based on a popular INA3221. The power monitor is more robust compared to other modules based on this IC. Each channel has proper RC filtering with TVS diodes to prevent INA3221 from being destroyed by transients, and to eliminate glitches. Pluggable screw terminals are rated for 15A, and can handle 12 to 30 AWG wires.

The third channel has a TPS1HB08A power switch, to be able to disconnect the load. The board can also provide power to the Feather or Arduino from the first channel via a built-in buck converter.

Block diagram

Schematics

Assembled board