BrowseBoardRepo

pnpcam

Public

@angusgbishop

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 25 files, ready to open in KiCad1.1 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip305 KBGerbers and drill zip: Illum73 KBGerbers and drill zip: OpenPnPVis267 KBPick and place (CSV)4.9 KBPick and place (CSV): Illum1.8 KBPick and place (CSV): OpenPnPVis5.3 KBPCB BOM CSV (PCB SVG)3.4 KBPCB BOM CSV (PCB SVG: Illum)1.3 KBPCB BOM CSV (PCB SVG: OpenPnPVis)3.8 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)8.1 MB3D model (GLB): Illum2.1 MB3D model (GLB): OpenPnPVis7.5 MB
Browse all files

Share pnpcam

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/angusgbishop/pnpcam

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

PnPCAM

PnPCAM is an Open Hardware project dedicated to bringing high-quality machine vision to the various open source pick-and-place projects.

This project is very much in development, clone at your own risk!

The current versions of the board are based off the OnSemi AR0144 image sensor, as it is avaliable through mainline distributers at a reasonable cost for low quantities.

  • Up-to 1200x800 pixel resolution at 30fps (Currently limited by USB Bridge Chip)
  • Global shutter
  • Standard Webcam USB out
  • Onboard LED with exposure-triggered flash (Requirement Dropped)
  • LED Expansion Header for third-party use of the flash signal.
  • Triggered shutter mode.
  • Onboard lens distortion correction.

Interested?

View the Wiki here

Find me on the OpenPnP Discord

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.