Imported from GitHub: automote/thingBot-LoRa · commit 7e5c90d · license GPL-3.0

Description

This repo contains design files for RFM95/RFM92 LoRa modules in XBee form factor

README

thingBot-LoRa

The thingBot-LoRa is based on HopeRF's RFM92/95 LoRa modules, featuring Semtech SX1272/78

• LoRa(TM) Modem
• 157/168 dB maximum link budget
• +14 dBm high efficiency PA
• Programmable bit rate upto 300 kbps
• SPI Interface
• -137/-148 dBm Sensitivity
• 89 dB Blocking immunity
• Low RX current of 10 mA
• FSK, GFSK, MSK, GMSK, LoRa(TM), OOK modulation
• 127 dB Dynamic Range RSSI
• Packet engine upto 256 bytes with CRC
• Built-in temperature sensor and low battery indicator

Platform Features

• XBee Compatible
• Power ON Led
• 3.3V Vin
• SPI Interface
• On-board RESET button

Getting Started

• Place any thingBot-LoRa on any XBee Socket
• Connect the pins to your Microcontroller as mentioned in the manual
• Upload your code and enjoy!!!

Maintainers

The thingBot-LoRa is maintained by thingTronics Innovations.

Main contributor:

• Manohar Bompella @[email protected]
• Vishnu Sherikar @[email protected]
• Jagadevan V @[email protected]
• Lovelesh Patel @[email protected]