Loading files…
Goal: Build a custom data acquisition system capable of capturing and displaying fast analog signals with at least a 15 MHz bandwidth.
Project Scope:
The system is divided into four main functional blocks:
The AFE is a fully custom design inspired by commercial oscilloscope teardowns and open-source projects. The signal chain operates as follows:
The offset adjustment is achieved by injecting a control voltage into one of the FDA pins. This voltage is generated by an MCP4728 quad-channel DAC, which simultaneously controls the VGA gain. By utilizing a summing amplifier connected to the negative rail, the offset voltage can swing approximately ±4.5V.
The core of the DAQ engine is a state machine responsible for the pre-fill, trigger, and post-fill capture sequence. The VHDL architecture includes several key design features:
STOP state, preventing concurrent memory overwrites while the MCU reads the data.Testing was conducted in progressive stages to isolate the scope of potential problems:
While the current revision meets all initial project goals, several architectural improvements could be made in future iterations:
Currently, the project has reached a successful proof-of-concept stage and sits at a crossroads. For simplicity, the captured data is currently sent to a PC app and visually represented as raw sample values. For the next version, there are two primary paths forward:
No comments yet. Be the first to ask about this board.