BrowseBoardRepo

nfc-scanner-hardware

Public

@bloop-box

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 6 files, ready to open in KiCad167 KBSchematic PDFEvery sheet, to read or print126 KB3D modelThe board with its parts, for an enclosure (GLB)3.2 MB
Browse all files

Share nfc-scanner-hardware

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/bloop-box/nfc-scanner-hardware

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

Bloop NFC Scanner Hardware

CI

Documentation

Connect an RC522 based NFC-Reader to your computer using USB

The project is based around a Raspberry Pi RP2040 microcontroller. It would have been possible to solve this with a much simpler controller but availability and pricing at the time of development as well as ease of use made the RP2040 with built in USB the best choice.

The board is designed using KiCAD 6 with production and assembly by JLCPCB in mind. All parts are selected to be available from JLCPCB at the time of writing and as many parts as possible are used from their basic library.

Case

A simple case design can be found in the case subfolder. It fits when the two boards are connected with standard angled 2.54mm pitch connectors as seen in the picture.

The two halves can be connected with self-tapping, countersunk M3x6 screws

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.