Loading 3D model… large boards can take a moment.
The Boardoza BME688 Breakout Board is a compact environmental sensing solution built around the Bosch Sensortec BME688 4-in-1 sensor. It combines gas, barometric pressure, temperature, and relative humidity sensing into a single device while offering high accuracy, fast response times, and low power consumption. The integrated gas sensor is capable of detecting a wide variety of Volatile Organic Compounds (VOCs) and Volatile Sulfur Compounds (VSCs) when combined with Bosch's AI software ecosystem.
Designed for both hobbyists and professional developers, the board supports I²C (default) and SPI communication, making it compatible with a wide range of microcontrollers and embedded systems. It is ideal for air quality monitoring, smart home automation, HVAC(Heating, Ventilation and Air Conditioning) systems, weather stations, indoor environmental monitoring, industrial sensing, food freshness detection, and AI-powered gas classification applications using Bosch BME AI-Studio.
| Front Side | Back Side |
|---|---|
Model: BME688
Manufacturer: Boardoza
Manufacturer IC: Bosch Sensortec
Functions: Gas Sensor, Barometric Pressure Sensor, Temperature Sensor, Relative Humidity Sensor
Supply Voltage: 3.3V – 5V DC
Logic Voltage: 3.3V / 5V Compatible
Communication Interface: I²C (Default) / SPI (Selectable)
Pressure Range: 300 – 1100 hPa
Humidity Range: 0 – 100% RH
Gas Detection: VOCs, VSCs and various gas mixtures (AI classification supported)
Temperature Range: -40°C to +85°C
Board Dimensions: 20mm × 20mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VCC | Power Supply Input (3.3V–5V) |
| 2 | nCSB | SPI Chip Select (Active Low, not 5V tolerant when used directly by sensor) |
| 3 | SDA / MOSI | I²C Serial Data / SPI MOSI |
| 4 | SCL / SCK | I²C Serial Clock / SPI Clock |
| 5 | ADR / MISO | I²C Address Select / SPI MISO |
| 6 | GND | Ground |
Note: The board operates in I²C mode by default. To enable SPI communication, short the JP1 solder jumper or externally pull the nCSB pin LOW.
This repository contains both hardware and software components:
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
All software and firmware are licensed under BSD 3-Clause License.
No comments yet. Be the first to ask about this board.