Loading files…
The Boardoza E-Paper Driver 24 Pin Breakout Board makes it easy to add a clear, paper-like display to your microcontroller projects. E-paper displays are easy to read in bright environments and can keep the last image visible even after the power is turned off. Since they mainly consume power while updating the screen, they are a great choice for battery-powered applications such as electronic shelf labels, smart badges, price tags, information panels, industrial indicators, and low-power IoT devices.
The board includes a standard 24-pin FFC/FPC connector and the power circuitry required to operate compatible e-paper panels, so there is no need to build a separate driver circuit. It supports SPI and I²C-compatible signals, provides a busy-status output to indicate when the display is refreshing, and can be used with compatible black-and-white and multi-color e-paper panels, including black-white-red and black-white-red-yellow display types.
| Front Side | Back Side |
|---|---|
Model: E-Paper Display Driver
Manufacturer: Boardoza
Communication Interface: SPI / I²C-Compatible Signaling
Input Voltage: 3.3V
Display Connector: 24-Pin E-Paper Connector
Integrated Power Circuit: DC-DC Booster with Gate Voltage Generation
Busy Status Output: Available (BSY Pin)
Operating Temperature: -40°C to +85°C
Board Dimensions: 40mm x 20mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | 3.3V | 3.3V Power Supply Input |
| 2 | GND | Ground |
| 3 | DIN | SPI Data Input (MOSI) / SDA |
| 4 | SCK | SPI Clock Input / SCL |
| 5 | nCS | SPI Chip Select (Active Low) |
| 6 | D/C | Data / Command Selection |
| 7 | RST | Hardware Reset Input |
| 8 | BSY | Busy Status Output |
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | NC | Not Connected |
| 2 | GDR | Gate Driver Control Signal |
| 3 | RESE | Current Sense / Resistor Sense Signal |
| 4 | VGL | Negative Gate Driving Voltage |
| 5 | VGH | Positive Gate Driving Voltage |
| 6 | TSCL | Touch / Auxiliary Serial Clock |
| 7 | TSDA | Touch / Auxiliary Serial Data |
| 8 | BS | Interface Selection Signal |
| 9 | BUSY | Busy Status Output |
| 10 | RES | Hardware Reset Input |
| 11 | D/C | Data / Command Selection |
| 12 | CS | SPI Chip Select |
| 13 | SCLK | SPI Clock Input |
| 14 | SDI | SPI Data Input |
| 15 | VDDIO | I/O Logic Power Supply |
| 16 | VCI | Power Supply Input |
| 17 | VSS | Ground |
| 18 | VDD | Logic Power Supply |
| 19 | VPP | Programming / Panel Power Voltage |
| 20 | VSH1 | Positive Source Driving Voltage |
| 21 | PVGH | Positive Gate Pump Voltage |
| 22 | VSL | Negative Source Driving Voltage |
| 23 | PVGL | Negative Gate Pump Voltage |
| 24 | VCOM | Common Electrode Voltage |
JP1 is used to configure the BS interface selection pin of the connected E-Paper panel.
By closing JP1, the BS pin is connected to GND, allowing compatible displays to operate in 3-line SPI mode.
A dedicated datasheet is not provided because this board functions as a generic E-Paper driver interface designed to support multiple compatible 24-pin E-Paper display panels with varying specifications.
This repository contains both hardware and software components:
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
All software and firmware are licensed under BSD 3-Clause License.
No comments yet. Be the first to ask about this board.