Loading files…
The Boardoza MLX90640 Breakout Board is a compact and high-performance thermal imaging sensor board built around the Melexis MLX90640 far-infrared sensor array. Featuring a 32x24 pixel thermal resolution, this breakout board delivers 768 independent temperature measurement points for accurate non-contact thermal analysis and heat mapping applications.
Designed for compatibility with both 3.3V and 5V systems, the board communicates through a high-speed I2C interface and supports refresh rates up to 64Hz. With its wide temperature sensing range and integrated thermal array, the MLX90640 is ideal for applications such as industrial monitoring, predictive maintenance, occupancy detection, smart home systems, thermal visualization, robotics, and embedded sensing solutions.
| Front Side | Back Side |
|---|---|
Model: MLX90640
Manufacturer: Boardoza
Manufacturer IC: Melexis
Functions: Far-Infrared Thermal Imaging Sensor Array
Sensor Resolution: 32 x 24 Pixels (768 Pixels Total)
Measurement Range: -40°C to +300°C
Field of View (FoV): 55° (X-axis) × 35° (Y-axis)
Interface: I2C
I2C Clock Speed: Up to 1 MHz
Refresh Rate: 0.5Hz to 64Hz
Supply Voltage (VCC): 3.3V to 5.5V DC
Logic Voltage Level: 3.3V / 5V Compatible
Typical Current Consumption: Less than 25mA
Operating Temperature: -40°C to +85°C
Board Dimensions: 20mm x 20mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VCC | Voltage Supply Input |
| 2 | SCL | I2C Serial Clock |
| 3 | SDA | I2C Serial Data |
| 4 | GND | Ground |
This repository contains both hardware and software components:
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
All software and firmware are licensed under BSD 3-Clause License.
No comments yet. Be the first to ask about this board.