Loading files…
The Boardoza SPX1117 ADJ Breakout Board is a compact and flexible adjustable linear voltage regulator board based on the SPX1117M3-L/TR low-dropout (LDO) regulator from MaxLinear. Designed for stable and low-noise voltage regulation, this board allows users to select between 5V (default), 3.3V, and 1.8V output voltages using dedicated solder jumper pads connected to the regulator’s ADJ pin.
With support for up to 800mA continuous output current, integrated thermal shutdown, and overcurrent protection, this module is suitable for powering embedded systems, sensors, development boards, and low-power digital electronics. Its compact size and configurable output options make it ideal for prototyping, IoT devices, industrial control systems, and portable electronics projects.
| Front Side | Back Side |
|---|---|
Model: SPX1117-ADJ
Manufacturer: Boardoza
Manufacturer IC: MaxLinear
Functions: Adjustable Linear Voltage Regulator
Regulator Type: Low Dropout (LDO) Regulator
Input Voltage: 6.5V – 20V
Output Voltage: 5V (default), 3.3V, or 1.8V selectable
Output Current: Up to 800mA continuous
Peak Output Current: 1A
Dropout Voltage: Typical 1.1V
Protection Features: Thermal Shutdown, Overcurrent Protection
Voltage Selection Method: Solder Jumper
Operating Temperature: -40°C to +125°C
Board Dimensions: 40mm x 20mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | ADJ | Adjustable voltage configuration pad |
| 2 | ADJ | Adjustable voltage configuration pad |
| 3 | 3.3V | Short pins 2 and 4 to configure 3.3V output |
| 4 | 1.8V | Short pins 1 and 3 to configure 1.8V output |
Default configuration provides 5V output.
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VIN | Power input (6.5V – 20V) |
| 2 | GND | Ground |
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VOUT | Regulated output voltage (5V(default), 3.3V or 1.8V) |
| 2 | GND | Ground |
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
No comments yet. Be the first to ask about this board.