Browse hardware designs
BoardRepo is the GitHub for hardware. View any KiCad schematic, PCB, and BOM in your browser and download the sources, no install and no account needed.
Public designs
The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.
No description.
Open source system for smart home
A 2x6 matrix antenna switch for HF HAM radio
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
Open Source Watermaker Controller.
System on Module based on StarFive 71x0 SoC.
Open-source ESP32-C3 platform for ultra-low-power environmental sensor networks powered by recycled LiPo cells. Includes KiCad PCB, PlatformIO firmware (ESP-NOW + ThingSpeak), BME280/BME680 support, deep-sleep optimizations and measured >12 months runtime on typical cells.
1 circuit board design a day for 31 days.
This is a Wing board for the RS-485 transceiver, which will convert a UART serial stream to RS-485
Simple board to add power over Ethernet to a project
An ESP32 in the Raspberry Pi form factor
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
MAIANA™ is the first Open Source AIS transponder. It proudly raises an extra long middle finger to the marine electronics industry, government overregulation and everything else that gets in the way of innovation in this space.
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.
Kicad project for a raspberry pi hat. Monitors push button and turns on/off power. 8 channels of ADC available and some connectors for other peripherals. Onboard CAN device and transceiver connected to the raspberry pi
Demo board which generates sample signals experimenting/checking oscilloscope features
8Axis LinuxCNC-RIO main-board - for the iceWerx iCE40-HX8K FPGA-Devboard - kicad project