BrowseBoardRepo

rj11-wemos-hat

Public

@chof747

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 6 files, ready to open in KiCad81 KBSchematic PDFEvery sheet, to read or print78 KB3D modelThe board with its parts, for an enclosure (GLB)1.6 MB
Browse all files

Share rj11-wemos-hat

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/chof747/rj11-wemos-hat

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

rj11-wemos-hat

Stack-up board for the wemos-mains-dev board which includes 2 RJ11 connectors that can be connected via solder pads to the broken out pins of the wemos D1 mini on the main board.

The board has the form factor to be stacked up on the wemos mains dev board to enable mains powered wifi enabled microcontroller projects

Elements

  • 2 RJ11 Connectors
  • Solder pads for all wemos pins (except 5V, 3V3 and GND)
  • 2 1x2 connector pads exposing the data lines of the RJ11s
  • 2 Jumpers to select the available 5V or 3V3 rail for the RJ11 connector
  • A push button for the reset and a push button for the flash pin of the wemos D1 mini + pull-ups

Used Parts:

Revision History:

  • v1.0: Initial version (Produced: 19.08.2023; First Assembly: 06.10.2023)
  • v1.1: Corrected RJ12 socket connector
Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.