m0118_integrated_usb

Drop-in replacement USB-C PCB for the Apple M0118 powered by QMK and VIAL.

Daughterboard

The board comes with a snappable daughterboard with onboard USB-C. To avoid extra costs no connector is used. Instead the user will solder wires accordingly to the pin correspondence (marked on the PCB).

Internal Wire

Internal wiring of a USB cable is possible. For this reason 2 holes on the pcb are available to the user. You can use them to tie down the cable using a zip tie for added stability.

An extra pin is provided, the Shiled pin. This is electrically connected to the board GND and it's solely used to avoid clipping the shielding wire off from the cable (if present at all).

hahahahaha funny QR

Firmware

Firmware is in development. Keep an eye out on the commits for it.

Firmware is OUT!! Precompiled VIAL .hex file downloadable here.