Loading files…
Berlin Uhr or Mengenlehreuhr, a fancy retro style clock that's a bit tricky to read: https://en.wikipedia.org/wiki/Mengenlehreuhr
The BerlinUhr is a standalone PCB with all the needed parts on it, just connect power over the USB-C and it will run.
The ATtiny167 receives the actual time from the DS3231 real time clock chip. Then displays it with 24 leds driven by the TLC5947. The brightness is adopted by measuring the ambient light with a KPS-3227.
This is special on the Berlin Clock. A practical explanation is given in the wikipedia article:
The Berlin Clock is easy to read after a couple of days :-)
KiCad Version of at least 6.0.2 is needed due to a bug in the KPS-3227 Footprint in older Versions: https://gitlab.com/kicad/libraries/kicad-symbols/-/issues/3164
Its 17:45 :smiley:
It can hang on a wall or sit on a table with the help of a USB-C phone docking station.
The bare PCB:
ISP Programming the Bootloader to the ATtiny with the help of a Arduino Uno:
Populated backside:
No comments yet. Be the first to ask about this board.