Loading…
This project is an LLC resonant converter. The power supply is designed to step down a nominal 60V input to a 12V output, capable of delivering up to 10A of continuous current (120W).
The board features power telemetry using an INA219 sensor, which can be easily interfaced via a standard QWIIC connector.
Design: ✅ → Fabrication & Assembly: ✅ → Bring-up: ✅
[!IMPORTANT] Hardware modification required (rev.1.0.0):
Replace
R20with a diode (e.g.1N4148) to prevent VCCP from backfeedingU3. Without this fix, VCCP remains too low for the LLC controllerU1to start up.
Loading files…
No comments yet. Be the first to ask about this board.