picow_ssr_control

The Raspberry Pi Pico W Solid State Relay Controller is primarily meant to be used with an open hardware solid state relay PCBs that is being co-developed alongside this project as part of my Dragon Mobile GitHub organization to make useful hardware with associated firmware and software for the tiny home, van life and maker communities.

Visual 3D examples

Top view

Bottom view

Description

The board consist of four main electronic sections: Power In / Control Out, Power Management / Regulation, Manual Control, and the PicoW Control / Drivers. There is one mechanical section as well: Mounting Holes.

Contributing

Contributors are welcome. Please note that this project has a Contributor Covenant Code of Conduct. By participating in this project you agree to abide by its terms.

All intentionally contributed hardware will be considered to be contributed under the CERN license without any additional terms or conditions.

All intentionally contributed code will be considered to be contributed under a MIT license without any additional terms or conditions. Please include your information in a comment on all code files for the copyright etc.

All intentionally contributed documentation, CAD files and libraries, footprints, artwork or non-code text like this README etc. will be considered to be contributed under the same CC-BY-SA license without any additional terms or conditions.

Pull requests are always welcome. For major changes, please open an issue first to discuss what you would like to change. Please make sure to update or add tests as appropriate for all software changes.

Licenses

All hardware is licensed under the

• CERN - CERN-OHL-W-2.0

You can find a copy of the CERN Open Hardware License - Weakly-reciprocal v2.0 in the LICENSE-CERN-OHL-W-2 file and the how-to guide in the CERN-HOWTO_GUIDE file.

All code is licensed under the

• MIT - MIT License

You can find a copy of the license in the LICENSE-MIT file.

All documentation like this README is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License (CC-BY-SA).

All original CAD files and libraries, footprints, and artwork are also licensed under the Creative Commons Attribution-ShareAlike 4.0 International License (CC-BY-SA). You can find a copy of the CC-BY-SA license in the LICENSE-CC-BY-SA file.

If after reading the above license files, how-tos, and related FAQs on the linked license sites on how they apply to the project please either open an issue or contact me (Michael Cummings) via my Github email and I will try to guided you through my understanding of how it works.

---

Copyright © 2022-2023, Michael Cummings