======================================================================================================================================= Breakout board for RAK811/RAK4200 LoRa adaptable nodes, small size, used when both AA battery holders were installed.

Breakout board & prototype area to mount a few ( and small ) thru-hole components to interface LoRa node. Also can be used as a template for a custom interface board.

Read this in other languages: Español </docs/README.es.rst>_

.. image:: /docs/pcb3d.png

Key features:

• Double sided traces and pads for added strength
• Prototype area with two parallel tracks connecting multiple pads, to be used as a power&ground rails
• Solder directly to the node's pcb using male header pins for a permanent, rigid and low height card
• Connect to the node's pcb using male-female pin header combination, for a more flexible solution

How to use this repository

The PCB was developed in KiCad V5.1,

Directory structure

• The root folder contains KiCad files: project, schematic and PCB.
• gerber/single directory contains ready to manufacture files, for a single board.
• gerber/panel_100mmx100mm directory contains ready to manufacture files that fits in a 100mm x 100mm panel (use Vcuts!).

License

.. image:: https://i.creativecommons.org/l/by/4.0/88x31.png :target: http://creativecommons.org/licenses/by/4.0/

This is an Open Hardware project and is licensed under a Creative Commons Attribution 4.0 International License, <http://creativecommons.org/licenses/by/4.0/>_