Loading files…
Smart Power Protection: This homebrew powerboard actively monitors input voltage to safeguard connected RTB modules. It automatically interrupts power to the RTB subsystem if the voltage drifts outside the safe range of 12V to 18V, preventing damage from erroneous power conditions.
The PCB layout uses SMD footprints with 0.4mm pitch and a mix of 0603 and 0402 parts. Reflow soldering is mandatory.
| top | bottom |
|---|---|
Filename structure: { pcb }{ code }{ version }.hex
Example: C11F0001.hex
| Description | |
|---|---|
| pcb | Name of matching hardware (C11) |
| code | Type of code contained (R=rom, B=bootloader, F=flash, U=bld update, P=UPDI factory code) |
| version | Release version (####) |
The fuse settings as well as the P-code (C11Pxxxx.hex) has to be installed by using UPDI.
| Fuses Setting |
|---|
| <img src=supplemental/images/C11_fuses.jpg width=500> |
| Standalone | Closeup | FDX + HDX bus connected |
|---|---|---|
No comments yet. Be the first to ask about this board.