Loading files…
My Homebrew D21 decoder is a double sided mobile decoder with Next18 (NEM-662) connector. The decoder is designed to integrate into the RTB digital control infrastructure.
The current PCB layout uses SMD footprints with 0.5mm pitch and 0402 parts. Reflow soldering is recommended.
:yellow_circle: Requires my Kicad project library RTB_SamacSys in the same directory tree.
Filename structure: { pcb }{ code }{ version }.hex
Example: D21F0001.hex
| Description | |
|---|---|
| pcb | Name of matching hardware (D21) |
| code | Type of code contained (R=rom, B=bootloader, F=flash, U=bld update, P=UPDI factory code) |
| version | Release version (####) |
The fuse settings as well as the P-code (D21Pxxxx.hex) has to be installed by using UPDI.
Connecting the decoder via its track pins to a 5V(DC) power supply will boot its CPU. This way, its easy to program the fuses and flash.
<img src=supplemental/images/D21_updi.jpg width=800>
| Fuse Setting | P-code Install |
|---|---|
| <img src=supplemental/images/D21_updi_fuses.jpg width=500> | <img src=supplemental/images/D21_updi_memory.jpg width=500> |
| top | bottom |
|---|---|
This project is intended for hobby use only and is distributed in accordance with the Apache License 2.0 agreement.
No comments yet. Be the first to ask about this board.