Loading…
This project is a custom-designed RGBW LED lighting controller built with KiCad and designed to integrate seamlessly with Home Assistant using Tasmota firmware on an ESP8266. I wanted a reliable, low-cost RGBW controller that worked well with Tasmota and Home Assistant, supported both 12V and 24V strips, and could be manufactured easily. So I built my own! Perfect for DIY smart lighting installations where cost, flexibility, and local control via Home Assistant are key.
Configuration within Tasmota as Module Type 'Generic (18)' (Fig.: (D))
To toggle the two LED rows in this example pin D1 and D2 are used (Fig.: (D.1)) The colouration of the lights (Fig.: (D.2)) is being changed by the pins D6, D7, D8. Independet the amount of white value (Fig.: (D.6)) is being changed by pin D5. If you want to use a separate external button for switching, in this example it is reserved for D0 (Fig.: (D.7)).
Schematic (Fig.: (E)), Gerber files (Fig.: (F)) and *.STEP (Fig.: (G)) files are shared as a reference. As illustrated in Fig. (C) I manufactured the prototype as DIY, which is why the STEP files was created.
Loading 3D model… large boards can take a moment.
No comments yet. Be the first to ask about this board.