Joulescope Front Panels

Welcome to Joulescope™ JS220 front panel hardware design project. This project contains the open source hardware designs for a variety of JS220 front panels. These front panels customize Joulescope so that it can more easily connect to your power supply and target device. For more information on Joulescope, see www.joulescope.com.

The Baseline PDF show the board outline and critical dimensions.

The 2x3 connector to the main board is Samtec TSM-103-01-S-DV-A (Mouser, Digi-Key)

The boards have been fabricated using PCBWay. Here are the order notes (example):

• Size: 95 x 24.7 mm
• FR-4, TG 150-160, 1.6 thick, 6/6, 0.3 mm min hole size
• Solder Mask: Black, White silkscreen
• Surface Finish: HASL lead free, do NOT check accept ENIG substitution
• Finished Copper 1 oz

Special requests text: The front-side surface is cosmetic.
Reject units with scratches and blemishes. Place all markings on back, including pcb product number. Add flammability rating marking on back, such as 94V-0.

License

All Joulescope front-panel designs are released under the permissive Apache 2.0 license.