BrowseBoardRepo

access-control-gen2

Public

@makerspacenewcastle

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 32 files, ready to open in KiCad733 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip197 KBGerbers and drill zip: controller147 KBPick and place (CSV)2.8 KBPick and place (CSV): controller2.7 KBBOM CSV8.7 KB
Schematic PDFEvery sheet, to read or print115 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)5.8 MB3D model (GLB): controller4.1 MB
Browse all files

Share access-control-gen2

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/makerspacenewcastle/access-control-gen2

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

This repo contains the Controllers (firmware, pcb design, printables) that make up part of the Makerspace Access Control System.

The basic principles they follow are:

  • Use NFC readers (enrol a fob or card of your choice)
  • Receive updates over Wifi, but cached on the controller in flash storage.
  • Able to work offline and queue events to send to controller when connectivity established
  • Provide log updates to the access controller backend to allow device usage to be logged and tracked.

They're an important part of our Health and Safety obligations to our members, ensuring that only authorised users are able to use (potentially) dangerous hardware.

The documentation is on the wiki (in progress...!)

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.