rt1010py

RT10100Py

RT1010Py is Cortex-M7 running at 500Mhz MicroPython board

https://www.olimex.com/Products/MicroPython/RT1010-Py/open-source-hardware

The RT1010-Py can also be used together with its DevKit board

https://www.olimex.com/Products/MicroPython/RT1010Py-DevKit/open-source-hardware

Features

• MIMXRT1011DAE5A running at 500Mhz
• 128KB on board RAM
• 2MB SPI Flash
• Three UARTs
• Two hardware SPIs
• Two hardware I2Cs
• One hardware I2S
• Four PWM units with complementary outputs for push-pull drivers
• USB 2.0 OTG
• Micro SD card connector
• RTC with 32.768 kHz crystal
• RESET button
• BOOT button
• UEXT connector with 3.3V, GND, I2C, SPI, and UART
• Two GPIOs headers spaced at 22.86 mm (0.9”)
• Dimensions: (53.34 x 25.4)mm (2.1 x 1)”

Library

The library must be copied on the MicroPython board before using some of the examples.

MicroPython MIP Installer

On a WiFi capable plateform:

>>> import mip
>>> mip.install("github:OLIMEX/RT1010Py")

Or via the mpremote utility :

mpremote mip install github:OLIMEX/RT1010Py

Manual installation

Copy all the files from OLIMEX/RT1010Py/lib repository to your MicroPython board under /lib directory.

Documentation

Check the files in OLIMEX/RT1010Py/DOCUMENTS for ressources:

• RT101-0Py User Manual (pdf)
• RT1010-Py PinOut (jpg)
• RT1010-py board (png, for drawing circuit)
• and some other

Also check the RT1010Py-DevKit user manual at OLIMEX/RT1010Py-DevKit repository

Licensee

• Hardware is released under Apache 2.0 Licensee
• Software is released under GPL3 Licensee
• Documentation is released under CC BY-SA 3.0