BrowseBoardRepo

le_capybara_keyboard

Public

@petejohanson

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 120 files, ready to open in KiCad3.0 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip1.0 MBGerbers and drill zip: le_capybara1.0 MBGerbers and drill zip: le_capybara_plate356 KBPick and place (CSV)7.0 KBPick and place (CSV): le_capybara7.3 KBPick and place (CSV): le_capybara_plate2.4 KBBOM CSV18 KB
Schematic PDFEvery sheet, to read or print357 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)14 MB3D model (GLB): le_capybara15 MB3D model (GLB): le_capybara_plate6.7 MB
Browse all files

Share le_capybara_keyboard

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/petejohanson/le-capybara-keyboard

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

Le Capybara Keyboard

Capacitive sensing (aka Topre) keyboard in Le Chiffre layout

Status

  • Prototype tested. Issues had been fixed. Current CAD files should be fully functional.

Misc

3D assembly preview

PCB Renders

Interactive BoM

Download and open this html locally

Schematic

pdf

Assembly hardware

There are 30 mounting hole to assemble the PCB-switch-plate sandwich. It's more than necessary, 15-20 sets should be more than enough. For each hole, you will need:

  • 1x: M2 x 5mm long brass threaded standoff. Commonly found on aliexpress with a 3.2mm diameter.
  • 2x: M2 x 3mm low profile screws
Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.