Loading…
A microcontroller PCB based on the RP2040 MCU from Raspberry Pi with an on-board high-performance IMU, 2S LiPo battery charging circuit, 32 MB quad SPI flash memory, and a bunch of GPIO breakouts.
I have not personally tested this board. If you want to manufacture it, you should carefully go through the design once. Downloading this project and opening it in KiCad and running the ERC or DRC will result in many warnings, but almost all of them are safe to ignore as most of them are courtyard overlapping warnings.
Loading files…
No comments yet. Be the first to ask about this board.