Loading…
This project aims to design and build a PCB evaluation board for the TUSS4470 ultrasonic driver that can be manufactured in a home workshop environment.
The main objective is to create a simple, low-cost board that allows testing and characterization of the TUSS4470 in real operating conditions without relying on expensive commercial development kits.
The board will:
Requirements:
On release or manual run, the KiCad PCB Jobs workflow produces the main artifact (folder main/ in kicad-job-main.zip). It is set up for home PCB fabrication using the film photoresist method:
| Layer | Processing | Purpose |
|---|---|---|
| F (front) | Inverted and mirrored (mirror + negative) | Print on transparent film for top-side photoresist exposure |
| B (back) | Inverted only (negative) | Print on film for bottom-side exposure |
The main job outputs layer PDFs (F.Cu, B.Cu), drill files (Excellon), and BOM (CSV). Use them to print masks on transparent film and then UV-expose the photoresist-coated blank.
This project is licensed under the MIT License — see the LICENSE file for details.
Loading files…
No comments yet. Be the first to ask about this board.